@welddotcomWeld.com

The Global Welding Community Education * Resources

card updated Oct 14, 2026 · 13 clips parsed · following 155 · 2,500,000 likes total

Engagement5.46%normal range

Account summary

@welddotcom has 195,100 followers and 1,919 videos. Across the 13 parsed clips the average is 402,495 views and 21,635 likes. Engagement to views is 5.46%, which is normal range for TikTok. On the newer half of the feed the response is rising (+0.55 pp). Posts roughly 0.1 times a week. An average clip reaches 206% of the follower count.

Followers

195.1K

history is still being collected

Engagement

5.46%

+0.55 pp newer half

Average views

402.5K

median 14.1K

Likes per clip

21.6K

62 comments avg

Shares / saves

283 / 2.5K

0.61% of viewers save

Posting rate

0.1 / wk

reach 206% of followers

Latest clips

13 collected

No filler wire? That’s autogenous TIG welding. It’s also a useful begi — @welddotcom

12.4K0:42No filler wire? That’s autogenous TIG welding. It’s also a useful beginner exercise: practice forming a puddle and movin4641731

Hot whip or cold whip? Austin lets the keyhole make the call. 👀 Small — @welddotcom

7.5K2:50Hot whip or cold whip? Austin lets the keyhole make the call. 👀 Small keyhole: work in the puddle. Larger keyhole: step 5534943

That perfect 6010 setting you found in 2G? It might not work in 1G, 3G — @welddotcom

14.1K3:55That perfect 6010 setting you found in 2G? It might not work in 1G, 3G, or 4G. As the position changes, your gap, puddle1.1K618187

If your 6010 open root is giving you trouble, check your prep first. Y — @welddotcom

29.3K4:00If your 6010 open root is giving you trouble, check your prep first. You cannot prep every position the same way and exp2.3K651362

Could a laser root pass change combo welding? At The Handheld Laser In — @welddotcom

4.4K0:45Could a laser root pass change combo welding? At The Handheld Laser Institute, we used a handheld laser for the root pas2110212

Well are officially in October and that means we weeks away from throw — @welddotcom

25.9K0:33Well are officially in October and that means we weeks away from throwing down at the @fabtechexpo kickoff party at The 94931057

We tried welding 3/8-inch plate in only two passes with a handheld las — @welddotcom

5.8K1:02We tried welding 3/8-inch plate in only two passes with a handheld laser welder. The catch? We had access to both sides 20821214

Everybody knows laser welding can handle thin material. But can it fil — @welddotcom

5.3K0:52Everybody knows laser welding can handle thin material. But can it fill a 3/8-inch multipass groove weld? Buddy Holbrook2961118

When torch cutting, start at 90 degrees to the workpiece. A lot of wel — @welddotcom

10.9K0:50When torch cutting, start at 90 degrees to the workpiece. A lot of welders will add a slight push angle because it can m4441643

Need a quick rule for cutting-torch standoff distance? Set a neutral f — @welddotcom

16.9K1:55Need a quick rule for cutting-torch standoff distance? Set a neutral flame, then hold the tip about the length of the in907727134

There are a lot of things that can go wrong with MIG welding and here — @welddotcom

2.3M0:54There are a lot of things that can go wrong with MIG welding and here @Austin runs us through some of the most common "M117K3872.1K18.4K

Slag can be a drag when stick welding, but here are 5 different ways y — @welddotcom

1.3M0:49Slag can be a drag when stick welding, but here are 5 different ways you can tackle it! Let us know your favorite ways o51.3K1734154K

When you are running your root pass with Tig you want to make sure tha — @welddotcom

1.5M1:01When you are running your root pass with Tig you want to make sure that your tungsten stickout is long enough so you can105.6K2121K8.7K

Engagement per clip

13 parsed clips · newest on the right · click a bar to open the clip peak: 7.9% ER

Aug 29Sep 30Oct 13

Date	Views	Likes	Comments	Shares	Saves	ER
Oct 13, 2026	12,400	464	1	7	31	3.81%
Oct 10, 2026	7,480	553	4	9	43	7.57%
Oct 7, 2026	14,100	1,063	6	18	187	7.71%
Oct 5, 2026	29,300	2,259	6	51	362	7.90%
Oct 2, 2026	4,373	211	0	2	12	4.87%
Oct 1, 2026	25,900	949	3	10	57	3.71%
Sep 30, 2026	5,769	208	2	12	14	3.85%
Sep 29, 2026	5,310	296	1	1	18	5.61%
Sep 26, 2026	10,900	444	1	6	43	4.14%
Sep 25, 2026	16,900	907	7	27	134	5.57%
Jan 26, 2024	2,300,000	117,000	387	2,089	18,400	5.19%
Oct 1, 2023	1,300,000	51,300	173	415	3,984	3.99%
Aug 29, 2023	1,500,000	105,600	212	1,026	8,675	7.12%